2گروه آموزشی چسب و رزین موسسه پژوهشی علوم و فناوری رنگ، تهران ، ایران
3دانشگاه سمنان
چکیده
چکیده در این پژوهش، ابتدا نانو کامپوزیت های یورتان آکریلات- رس پخت شونده با پرتوی فرا بنفش سنتز شد، سپس اثر نانو ذرات بر پایداری حرارتی، خواص مکانیکی و هدایت حرارتی نانو کامپوزیت های یورتان آکریلات (UA) مورد بررسی قرار گرفت. ساختار مولکولی الیگومر یورتان آکریلات به وسیله آنالیز FT-IR تأیید شد. تصاویر به دست آمده از SEM نشان داد نانو ذرات به طور یکنواخت در بستر پلیمر پخش شده اند. پایداری حرارتی نمونه ها به وسیله آنالیز وزن سنجی حرارتی (DTG) بررسی گردید. آنالیز DMTA نشان داد افزودن مقدار معینی از نانو ذرات رس (3% و 5% وزنی) به بستر پلیمر سبب بهبود قابل توجهی در خواص مکانیکی و رفتار حرارتی نانو کامپوزیت ها می شود. همچنین آنالیز عکس برداری حرارتی زیر قرمز نشان داد هدایت حرارتی نانو کامپوزیت ها با افزایش مقدار نانو ذرات (3% و 5% وزنی) افزایش یافت.
Synthesis, characterization and study on thermal stability, mechanical properties and thermal conductivity of UV-curable urethane acrylate-Clay (MMT) nanocomposites
نویسندگان [English]
Abbas Madhi1؛ behzad Shirkavand Hadavand2؛ Ali Amoozadeh3
1Faculty of chemistry, Semnan university
2Department of Resin and Additives, Institute for Color Science and Technology, 1668814811, Tehran, Iran
3Semnan University
چکیده [English]
Abstract In this study, at first UV-curable urethane acrylate-Clay nanocomposites (UA/Clay) were synthesized, then the effects of nanoparticles on the thermal stability, mechanical properties and thermal conductivity of UA nanocomposites were investigated. FT-IR analysis confirmed the molecular structure of urethane acrylate oligomer. SEM images showed that the nanoparticles were dispersed uniformly in the polymer matrix. The thermal stability of samples were investigated by thermogravimetric analysis (DTG). DMTA study indicated significant improvement in the mechanical properties and thermal behavior of nanocomposites by adding a certain amount of Clay (3, 5 wt%) nanoparticles to polymer-matrix. Moreover, infrared thermography analysis showed that thermal conductivity of the nanocomposites rose as filler content increased (3, 5 wt%).